Hasukubana Noboretto mower 540N «collector (grass box) with» [lawn mower (mowing lawn mower trimmer payment Kusakari) if Husqvarna husqvarna] [P5]

Husqvarna lawn mower Noboretto 540N, the magazine, we were introduced in Scandinavian style 『.

Husqvarna mower 540N expression of the barrow 『Scandinavian Style』 (vol.20/09 issue of April 20) was introduced in. Kuto is organized to introduce the features and Production Co., Scandinavian decor, kitchen tools and tableware, furniture, interior, out of one category has been introduced as a tool gardening showcase.

Hasukubana 540NWill, 40cm can reap a lot of time weeding in width. But first I have to press a little power, I run out and get a comfortable Sharishari and inertia.

Expression mower cartNoborettoIf, next season is guaranteed to be active Janjan! It is.

In addition, the height of mowing the lawn can be adjusted to four levels. (12 ~ 38mm)

Hasukubana 540NIsFixed blade, use both the Swedish steel blade reelForBeen improved significantly by the things you wear-resistant hardened. Between the knife blade and reel 1/100mm adjustable unit is outstanding durability. Toothing is to allow yourself the edge by replacing the gear. ThisUnique features HusqvarnaIs. Polishing process is easy! This is also a long-selling product. You can also replace the rotary blades of course.

Hasukubana 540N, The grass will be collected in a smooth grass box attached to the rear. Large size of the grass box is 46 inches. It is hard to spill out of the box is large enough. When you throw the grass can be removed easily, is simple: work.

"" The new 2007 model year grass box is available were also purchased separately.

5 photos are attached to the rotating blade and fixed blade card.

[You can polish the blade! ]

1. Remove the foil. (Blade rotation)
2. Replace the gear on the bottom left.
3. And undo the foil, which opposed the revolution.
4. Lower blade (blade together) can be viewed while turning and grinding compound between.
5. After polishing, the gear back to the original, complete.

Lawn care, summer growing grass that is one or more appropriate to cut the grass once a week. Moderate spring and autumn growth is not very often needs to be done. (Several times a month), beautifully, in order to effectively take care of the lawn, please go to choose a lawn mower when the grass is dry. Lawn is walk straight at a normal speed, please do so and overlap. Varies slightly depending on the hardness of the ground, cutting grass too short and not very well. There are some who try to cut the number of lawn by mowing as short as possible, generally are 2cm ~ 3cm in length and perfect. The length of the grass cut to less than 1cm and they would have hurt the lawn.

If the grass is wet, so there is not only dangerous slippery grass 刈Re well, please have postponed the work. If you have too much the grass is growing, not to short a time, please cut short in stages. There is a risk to damage the grass short time.

To avoid too much cutting, the length of pruning can be adjusted in four stages. Usually, the center of the four stages of the two is designed to be a reasonable position and one either. Pruning length adjustment, tension adjustment knob on the outside as shown on the left want to keep everything and move to the position. At that time, please check that right knob is the same stage.

Also, the grass will always run out of water are in danger of contracting the disease. Therefore, you will need to mow the lawn turned into a sharp blade. By mowing the lawn with a sharp blade, you can prevent illness and lack of moisture to a minimum. The sharp blade to mow the lawn in addition, approximately 20 percent energy savings.

1. Remove the black cap with a screwdriver in the center of the tire are both about

2. Remove the clips that are attached to the center, remove the tires.

3. Replace the white and black gear on the inside of the tire.

4. Replacing the tires, adjust the long knife blade hit a little reel, pull the body in the opposite direction than normal. In place with no grass on the ground and rotate the blade 20m reel please enough. After the rotation, please make sure you clean the blade with shiny reels. If shiny, toothing is complete. (If not clean and shiny, please let a little more normal and reverse rotation.)

5.'re A toothing, please revert the 入Re換Eta gear earlier.

Six. Remove to clean up garbage that is attached to the inside when installing the tire, reducing the wear and gear you like to put the grease inside the wheel tire, durable.

7. Please re-adjust blade and fixed blade reel. ( "How to adjust the blade" please.)

Toothing can work on your own! / A fixed blade and rotary blade spacing adjustable 1/100mm unit / ball bearings by a combination of performance, sound and eliminate the wear of metal / improved durability quenching process used by Swedish steel blade trimmer / Easy to clean up after the mower! With grass box

• Cutting System: 5-blade reel
• Gari width: 40cm
• High-gari: 4-step adjustable features 12-38mm
• Unit Size: 56 × depth 34 × height width 123cm, total length 95cm (including handles)
• Weight: 9.1kg
• Materials: Body - Steel Blade - Stainless Sweden, with grass box
• Country of Origin: 540N is Noboretto Sweden or other EU countries has been produced.

For warranty repair failures, etc.

• Holding period of repair parts: Out of print after this model,6 years
• Product Warranty:6 months
• If failure:Please contact the shop!Or shop, we are supported by bon appétit Hasukubanazenoa service shop.
• Rotary blade replacement:Stock at us, we are prepared bon appétit.
• Lapping processing blade (sharpened blade) also available. :For more information, please contact us.